Aeon Shuttering Plywood is an exterior grade,
pruscrvative treated plywood manufactured from
naturally durable veneers, impregnated with
unextended phenol formaldehyde resin adhe??ive.
The high strength, stability and resilience of this
product makes it ideal for all types of shuttering work
of in-house construction, factory building, bridge
construction, sewer construction, construction of
swimming pools and many other applications.
Technical Specifications |
|
|
|
|
|
Test prescribed in IS: 4990 | Specified requirement conforniity | Results |
Moisture content test | Not less than5% Knt less than 15% | 7.7% |
Glue shear strength | Mm.ind.nonN Avg.l350N | 1350N 152()N |
Water resistance test (after 72 hours boiling) - Glue shear strength -Adhesion of plies | MinSOON Avg. H)(«)N Minimum pass standard | 10601SI 1280N Excellent |
Mycological -Glue shear strength | Min. IndSOON Avg.lOOON | 1020N 121. ON |
Tensile Test -Along the grain -Across the grain Su m of tensile strength | 32.5N/sq-mm 22.5N/sq-rmii 60.0N/sq-mm | 46.5N/sq.mm 32.2N/sq.mm 84.7N/sq.mm |
9100N/5q.mm 4320N/sq.inm | 9100N/5q.mm 4320N/sq.inm | 9100N/5q.mm 4320N/sq.inm |
Feature
► The main advantage of Aeon Film Coated Shuttering Plywood is that the surface layer is smooth.
► Hard and mirror like flriish on both surfaces isan extra fbiish. This finish on R.CC.constructionleadsto49% cost savings.
► II can vvilhstanti water and abrasive action of concrete, piirticularly where vibrators are used.
► Does not read adversely with cement as it overlaid with phenolic resin impregnated film which gives it a clear and smooth surface,
scratch resistance dc excellent mechanical property.
Construction of swimming pools ► Bridge construction. It is also used for
Usage
► Factories and Buildings Sewer construction
other exterior and general shuttering work.
Precautions
Proper care should be taken during erection and dismantling of the Aeon Film Coated Shuttering Plywood, SO fiat it can be used a
number o£ times.
► Occasional application of releasing agents or mould oils is required to prevent the cement from sticking to the Shuttering Plywood
surface.
No comments:
Post a Comment