sharon Elasti ply
architectural and furniture design. This incredibly
flexible plywood can be bent to any shape to give life to
many a designer's dream that are not possible by
conventional plywood. It is a cost effective and
convenient solution for producing curved or rounded
wood structures especially when small radii are
required. Be it pillar covers, workstations, kitchen
cabinets or designer chairs!
Sharon Gold Ply MR and BWR grade
sheet of Sharon Gold Ply is manufactured from 100%
Hardwood by highly skilled & trained workforce. Until
1997 the entire production of Sharon Gold Ply was
exported to Japan. It set a new bench mark in product
strength and consistency to the quality conscious
consumers in India. Sharon Gold Ply is available in both
MR and BWR grade.
Victoria plywood | Flush Door | Block Board
BWR ply, Block Board 8 Flush Door par exceSence in
quality, strength, durability & finish. Our plant-is
equipped with latest machine & facilities. We have in
house sophisticated laboratory for quality checks ai
various stages and an established R&D centre, where
we strive for improvement & innovation always. We
produce Quality Material as per the specification of ISI
and we havethese certifications.
Victoria Plywood for general purpose it is for use oi
two grades, depending upon the bond strength
developed by the adhesive used for bonding the
veneers.
* Boiling water resistant or BWR Grade I
* MoisfuTereslstentorM.H. Grade
Recommended species of Timber used fi) produce*
veneer to manufacture Ptyvwod. couid be Seiecied
wood.The adhesive use for bondng the vsneera s
melamine urea formaldehyde resin, is diangec
version in the arena of old belief of so caiedcammeraai
plywood. The another is BWR Grade Plyooti s
bonded with superior grade phenol kymaUefiyde lesn
This adhesive is also used in Marine Giade. ShiAenng
& Chequered Plywoods.
USES: Almirahs, Show Cases. Shelves. RaAs. Roa
undehays, Kilchen Furnitures, Bed Rooms, Partbons,
Chair, StudyTab[e.OfflceCeilings,GorTf}ulerLati.and
many more places.
Fineply Shuttering | Film Faced Plywood
Fineply -Shuttering & Film Faced Plywood |
| ||||||
|
|
|
|
|
|
|
|
manufactured from carefully selected high density veneers. Fineply brands Shuttering |
| ||||||
|
|
|
|
|
|
|
|
Plywood is durable under alternate met and dry condition. They have high |
| ||||||
|
|
|
|
|
|
|
|
tensile strength and resistance to withstand the load of concrete and vibration during |
| ||||||
|
|
|
|
|
|
|
|
pouring of concrete. civil Engineering firms of repute across the country are our esteemed | |||||||
|
|
|
|
|
|
|
|
clients. These are used for all types of construction works. They can be used at places of |
| ||||||
|
|
|
|
|
|
|
|
high moisture and can be used about 25 times if properly lubricated and properly handled. | |||||||
|
|
|
|
|
|
|
|
Technical Specifications: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
modulus of Rupture (kg/cm^) |
| Thickness |
|
|
|
| |
| 9 mm | 12 mm | 13 mm | 25 mm |
|
|
|
Parallel lo race grain |
| BOD | SOD | SOO |
|
|
|
Perpendicular Co face grain | S50 | 500 | 500 | Iftfl |
|
|
|
Tensile Slrenelh (kg/cm^ |
|
|
|
|
|
|
|
Parallel to (ace grain | M25 | HOO | 3?5 | 175 |
|
|
|
Perpendicular lo face grain | 335 | 350 | 3?5 | 3?5 |
|
|
|
|
|
|
|
|
|
|
|
Fineply - Flush Door pecific requirements.
Restheticalty designed under stringent quality checks with utmost care. Fineply
Flush doors add color to your office or home. They are both structurally strong and
dimensionally stable. These Flush doors are made from select timber. They are
seasoned and then pressed at high pressure with liquid PF synthetic resin - the resirft
being quality 8UJP Flush doors. These are used for all kinds of doors & windows both
interior .
Rs per specific requirements.
30.32.35,3?
and any other thickness as per specific requirements.
Fineply's BwR plywood | Size and width | rate
Manufactured as per IS 303 specification. Fineply's premium quality BwR Grade
Plywood caters to every need of customer. Every fwR Grade Piywood is bonded with
PF synthetic resin under controlled pressure and temperature. the result being
absolutely boiling - mater resistant plywood- This plywood has the ability to
withstand the stroke of climatic condition. It is recommended for building
all types of interiors tabletops. kitchen panels, office file cable nets.
office partitions etc.
2.1HX1.2E 1.BHX1.E2 3,H.E,8.12,IB, 19.and25 |
|
| |||||
|
|
|
|
|
|
|
|
2.HHXa92 ZAHUaZ 1,84X0,92 |
|
|
|
|
| ||
|
|
|
|
|
|
|
|
Density |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sending strengtti |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
Scfeiu holding sCrengtli narmsl to face |
|
|
|
| |||
|
|
|
|
|
|
|
|
Tensile strength |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
nail holding strength to face |
|
|
|
|
| ||
|
|
|
|
|
|
|
|
fife fesislance |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
Suielling in mater after B hours |
|
|
|
|
| ||
|
|
|
|
|
|
|
|
ITloisturE content |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
D.Gato gm/cc |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
flboueHODhgs/cm |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
flbouB E5D kgs |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
Face grain 4?P kg/cm (min) |
|
|
|
|
| ||
|
|
|
|
|
|
|
|
Across face grain kg/cm (min) |
|
|
|
|
| ||
|
|
|
|
|
|
|
|
Sum ualue 8^5 kg/cm (min) |
|
|
|
|
| ||
|
|
|
|
|
|
|
|
FIbDue GQ kgs |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
Quite high |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
less than 1% |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
B to 12% |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Aeon Chequered Plywood | usage | Features | Precautions
Finest imported hardwoods are used to
produce Aeon Chequerod Plywood, The
product has a chequered pattern on the surface.
After being glued with unextended phenolic
re5in, the panels are pressed at high pressure
and temperatures making it a high densit)'
plywood to sustain the rigours of flooring in
public use. The product combines enhanced
Techanical properties with extreme wear-
proof qualities. It is also resistant to corrosive
agents and powder. The product has extensive
usage in transport and railway as well as
staircases everywhere, kitchens, flooring in
gardens etc.
|
|
Test prescribed | Observed value |
Density | 0.90 to 1.0 |
Moisture content | 10% |
Percentage of swelling {after boiling) |
|
Bending strength along the veneor grain across the veneer grain | 750 kg/sq.cm 750 kg/sq.cm |
Tensile strength along the veneer grain | 800 kg/sq.cm |
|
|
Aeon Qiequered Plywood is a specialised higli density non-skid ph'wood.
Excellent resistance to bad weather, water, impact and sudden shock loads.
Superior sound absorption, excellent electrical insulation.
Fire resistant properties, easy cutting, routing, screwing and grooving, giving it an edge over aluminium or steel
Hush boards.
► It does not require any painting or varnish, thereby eliminating the maintenance cost.
Aeon Chequered Plywood is overlaid with phenolic resin impregnated kraft paper to give it a smooth and glossy finish.
Usage
► Bus and railway coach flooring. *■ Flooring of containers,trucks and cabins.
► Extensive use in transport, swimming pools, staircases and in kitchens etc.
Precautions
Special care should be taken at the time of:
► Storing and using. ► Fixing and removalof the plywood.
Aeon MR Grade Block Board Features | Precautions |
Aeon MR Grade Block Board is manufactured using selected specits of limber. Melamine synthetic resin is used for
proper l>nnding. The product is diamentionaJly stable with high mechanical properties and excellent screw holding
capacity. Ideally used for interior cabinets, admirahs, furniture, door, partitions selves and other interior applications.
Features
► Only selected species of timber are used for the manufacture of core for Aeon Block Board. The planks are then kiln-seasoned to less than 8-10% moisture content for proper bonding. Aeon Block Board has high dimensional stability with high mechanical properties and excellent screw holding capacity.
► It does not expand, contractor warp like solid wood.
Usage
► Interior cabinets, furniture, doors, partitions, shelves and other interior applications.
Precautions
Aeon BIockBoard should best welt ventilated anddrres places to prevent fungus, insect and borer attacks.
Aeon Block Boards should be stored properly in stacks on flat level to prevent it from warping, bending and twisting.
Aeon MR Grade Plywood Features | Usage | Precautions
Aeon MR Grade Plywood has superior quality wood for the inner core as well as the outer surface and is bonded hy urea
formaldehyde resin and melaniine by hot pressing, it docs not crack, warp or delatninate easily. It is normally used for
furniture making, well panelling, partitions and ceilings.
Technical Specifications |
|
|
|
|
|
Test prescribed m IS: 303- | -Minimum value for | Observed value |
conformity |
| |
Glue shearstrength (in dry state) | Avg.HWON | 1180 N |
| Min. ind.SOON | 960 N |
Glue shearstrength (in wet state) | Avg.80CIN | 920 N |
| Min. ind.650N | 740 N |
Mycologica! | Avg. SOON | 890 N |
| Min. ind. 6500 N | 708 N |
Moisture content | Not less than 5% |
|
| Not less than 13% | U)% |
Cyclic test | Min. pass standard | Excellent |
|
|
|
Features
► ItiS bonded with high quality syntlietic MUF resin, which makesit moisture resistant.
It is a superior quality commercial plywoodd suitable for all interior applications.
Usage
► All household interiors ► Office in baaors ► All type of furniture *■ Partitions and panelling work.
Precautions
► Aeon MR Grade Plywood should be stored in a well ventilated and dry place to prevent fungus, insect and borer attacks,
Aeon Decorative Plywood | Features | Usage | Precautions
Ornamenta! veneers are bonded on one or both sides to make
it look beautiful. Gurjan core is used as core with superior
glue for perfect bonding makes the product borer and termite
resistant. Available in recon and natural species collected from all over the world.
Technical Specifications |
|
|
|
|
|
Requirements | Specified value as per 15:1328-19% | Compliance |
Open splits | Not more than 150 n:mi length and 0.5 mm in width rectified with veneer insert bonded with synthetic resin adhesive | O.K. |
Tom grain, dead knots, dote discolouration and sapwood | Free from such defects | O.K. |
Moistui^e content | >5, <15 | O.K. |
Water resistance test | No delamination or blister formation | O.K. |
|
|
|
|
|
|
Features
► Wide range of design, colours, shades and grains.
► Superior surface finish.
► Use of gurjan core makes border and termite resistant.
Better glue shear strength ensures good bonding.
Usage
Use for interior decoration in;
► Furniture of all kinds.
Precautions
► Aeon Decorative Plywood should be stored in well and dry places to prevent fungus, insect and borer attack.
► It should be stored properly in stacks on flat level to prevent from warping, bending and twisting.
Aeon Flush Doors | Technical Specifications | Usage | Feature |Precautions
Imported timbers of excellent qualiy and high resistance arc used to manufacture Aeon
Flush Door. Anti-borer and anti-termite make the product safe and durable.
The product is solid, tough to withstand dust and heat. Used for nursing homes,
auditoriums, residence, offices, hospitals, schools, colleges, etc. Available in one side, both sides teak.
Technical Specifications |
|
|
|
|
|
|
|
|
|
|
|
Test prescribed in JS:2202 (Part-1) 1999 | Minimiun value for conforntit\- | Obser\'ed value |
Dimension and squareness lest as per IS : 4020 (Part-1) 1998 | Height and width measured within a limit + 5 mm | VVittiin specified limits |
General flatness test as per IS:4020 Part4) I99a. | Twist, cupping, and warping shall not exceed 6 mm. | Withiji specified limits. |
Edge loading test - As per IS ; 4020 (Part-T) 1998. | Tlie deflection of the edge at the maximum load shall not he more than 5 mm. | Within specified limits. |
Shock resistance test as per IS : 4020 (part-8) 1998. | 4-5 shucks min. |
|
Slamming test as per IS : W20 (Part-10) 1998. | 50 times on the nails at the rate of 4.5 drops/min. | Found ok |
Varving humidit\' test as per IS:'4020 (part-12) 1998. | Denviation measured to an accuracv of 1.0 mm. | Within specified limit |
End immersion test as per IS : 4020 (part-13) 1998 | Shall have no delamination at the end of the test- | Found ok |
Knife test as per IS : 4020 (par(-14) 1998. | Minimum pass standard twnd at the end of the test. | Excellent Bond |
Glue adhesion lest as per IS : 4020 (part-15) 19% | No delamination | Found ok |
Screw withdrawal resistanct test as per IS : 4O20 (part - 16) 1998 | -Minimum required on withdrawal is 1000 N. | 2500 N No visible damage after the test |
|
|
|
Feature
► The batten are all made from selected single species of hardwood timber.
► The battens are machined and planed to the required thickness, presentative treated and season kiln dried.
► The battens are individually treated with insect toxic for long lasting protection.
► The boiling water proof synthetic phenol fomaldehyde adhesive used for adhesion is specially tinged with toxicants
and antidotes.
► Both internal and lipping can be provided at an extra cost,
► Apart from the standard sizes and thicknesses. Aeon Flush Doors are also available in other sizes and thickness.
Usage
*■ Aeon Solid Core Flush door is used for door shutters at homes and offices.
Precautions
► Aeon Flush Doors are to be handled with utmost care to avoid damage and scratches.
► Doors should be stored in a dry, dean and covered place havingraised and level surface.
► Flush Doors are to be installed only after finLsliing construction works,
► Polishing and painting of doors should be done after properly cleaning thesurface.
Aeon Fire Retardant Plywood Technical Specifications | Features | Usage |
Technical Specifications |
|
|
|
|
|
Test prescribed in IS:55I)y | IVlininium value for conforniitv | Obser\-ed value |
Moisture content | S%--\5% | 12% |
Glue shearstrength (in dr\'state) | Min-ind-nOON Avg.ind-1350N | T25nN 1330N |
Glue shear strength (wet) | Min.ind-800N Avg.ind-inoON | >ll)SON >135DN |
Mycological test | .Min.ind-SnOK Avg.ind-IODON | >1050N >1300N |
Cvclictest | Min. pass standard | Excellent |
Knife test (adhesion of ply) | Min. pass standard | Excellent |
Flammabilitv test | Niitless than30min. | > 40 Min. |
Flame [.Hfnetrtition test | Not less than 15 mts. for every A mm thickness | > ^5 mts. |
Rate of burning test | Not less than 40min. | > 40 mts. |
Retention | 50kg/m-^ | 70-80 kg/m'^ |
|
|
|
Features
► Fire resislant, Abrasion resistant. Scratch resistant. Stain resistant. Crack resistant.
Usage
► Recommended for horizontal and vertical use.
*■ Fire prone areas like kitchen, restaurants and hotels.
*■ Heavy duty doors and wall coverings.
► Interior wails of public transport systems
Aeon Flexi Plywood | Features | Usage | Precautions
Aeon Flexi Ply is a unique achievement of modem technologj'. The inherent problem of plywood has been its rigidity. But the technolog' combined with conventional material has created Flexi Ply which is the ultimate solution to the need and requirement of the furniture makers and the carpenters. It can be easily bent even by hand and offers tremendous flexibilitv to be maneuvered easily according to the requirement. Once it is glued, laminated or veneered, it holds the required shape.
Technical Specifications |
|
|
|
Thickness | 4 mm, 6 mm, 8 mm, 12mm |
Composition | Diptercarpus species. Hot pressed with tliermo-settingBWK Grade Adhesive |
Density | 0.75 gm/cc |
Bending radius 4 mm 6 mm 8mm 12 mm | Up to 7cm radius Up to ] 0 cm radius Uptol2cm radius Curve |
Direction of flexibilitv | Cross grain a 1 on g width |
Features
► Aeon Flexi Ply allows cold forming to the smalles tradius requirements. No need for heat forming or water treatment.
Self-supporting structures eliminate the need for structural skeletons or special supports.
► Unique design models, round structures and complex multi radii shapes that were virtually impassible to create with traditional material, can be quickly and easily prepared.
Usage
Aeon Flexi Ply, with its extremely high bending propety is highly suitable where bowed or curves hapes are required
Precautions
Aeon Flexi Ply should be stored in a cool, dry place.
The panel should be glued while fixed in desired shape. After the glue dries, the panel will maintain its shape.
The panel should be transported on a hard flat surface.
manner for long periods.
Shuttering Plywood Aeon | Feature | Usage | Precautions
Aeon Shuttering Plywood is an exterior grade,
pruscrvative treated plywood manufactured from
naturally durable veneers, impregnated with
unextended phenol formaldehyde resin adhe??ive.
The high strength, stability and resilience of this
product makes it ideal for all types of shuttering work
of in-house construction, factory building, bridge
construction, sewer construction, construction of
swimming pools and many other applications.
Technical Specifications |
|
|
|
|
|
Test prescribed in IS: 4990 | Specified requirement conforniity | Results |
Moisture content test | Not less than5% Knt less than 15% | 7.7% |
Glue shear strength | Mm.ind.nonN Avg.l350N | 1350N 152()N |
Water resistance test (after 72 hours boiling) - Glue shear strength -Adhesion of plies | MinSOON Avg. H)(«)N Minimum pass standard | 10601SI 1280N Excellent |
Mycological -Glue shear strength | Min. IndSOON Avg.lOOON | 1020N 121. ON |
Tensile Test -Along the grain -Across the grain Su m of tensile strength | 32.5N/sq-mm 22.5N/sq-rmii 60.0N/sq-mm | 46.5N/sq.mm 32.2N/sq.mm 84.7N/sq.mm |
9100N/5q.mm 4320N/sq.inm | 9100N/5q.mm 4320N/sq.inm | 9100N/5q.mm 4320N/sq.inm |
Feature
► The main advantage of Aeon Film Coated Shuttering Plywood is that the surface layer is smooth.
► Hard and mirror like flriish on both surfaces isan extra fbiish. This finish on R.CC.constructionleadsto49% cost savings.
► II can vvilhstanti water and abrasive action of concrete, piirticularly where vibrators are used.
► Does not read adversely with cement as it overlaid with phenolic resin impregnated film which gives it a clear and smooth surface,
scratch resistance dc excellent mechanical property.
Construction of swimming pools ► Bridge construction. It is also used for
Usage
► Factories and Buildings Sewer construction
other exterior and general shuttering work.
Precautions
Proper care should be taken during erection and dismantling of the Aeon Film Coated Shuttering Plywood, SO fiat it can be used a
number o£ times.
► Occasional application of releasing agents or mould oils is required to prevent the cement from sticking to the Shuttering Plywood
surface.
Marine Plywood | Features | Usage |Precautions
Features
► Aeon withstands heavy impact of tossing and tuminginsea.
Withstands alternate weting and drying, when exposed to severe exterior conditions.
► Pressure impregnated with fixed type preservation.
Usage
► Maintenance and repair of marine and river crafts, fishing boats, racing Ixiats and assault boats. Interiors
of ships and liners ► Heat exchangers Cooling tower Public hording, signboards, display-boards etc.
► Portablecabinsand shelters, which are exposed to severe conditions Structural applications.
Precautions
Special care should be taken for scarf jointing Marine Plywood, while making longer and broader panels, so
that minimum tensile strength and other characteristics are retained.
Selected Kardwood veneers are bonded u-ith
phenol formaJdehyde resin. Undergoing a
preservative treatment under vacuum pressure
impregnation, reconditioning its moisture
content betv^-een 8%-15%, makes it resistant to
heat, light, moisture, termites and marine
organisms. Used in constructing concrete
columns, beams, slabs, bridges, jetties, tunnels,
silos and tombs, it is ideally suited for curved
formwork. Can also be used for flooring, wall
paneling, ceillings, partitions furniture and
automobiles.
Technical Specifications
Test prescribed in IS: 71U-1976 Specified requirement Results
Moisture content Not less than 5%
Not less than 15% 8%-15%
Glue shear strength Min.Ind.llOON 1350N
Avg. 1350N 1550N
Adhesion of plies Minimum Excellent
Standard
Glue shear strength Min.KODN n50N
Avg.lOOON 1250N
Tensile strength
-along the grain 42.0N/mm* 55.0N/nW
- across the grain 23.0N/mm' 39.5N/mm^
Sum of tensile strength 84.5N/mm^ 94,5 N/mm"
Retention modulusofelasticity 12ks/m' 14kg/m^
Aeon PF Black Board | Features | Technical Specifications | Usage
veneers. The core is made from 1(H)% pine wooden strips seasoned to a
moisture content within 12% and chemically treated for termite
resistance. The strips (each 25 mm wide) are placed vertically and glued
laterally to form the core which is placed on top of the cross band. Face
veneer is placed on top of the cross band. Phenol formaldehyde
synthetic resinis used for bonding under high pressure in hot press.
Versatile, it can be reshaped, even curved to meet the requirements and
has a variety of usage, including furniture. It is recommended for
cupboard shutters, shelves, table tops etc.
Technical Specifications
Test prescribed in 15:1659-199(1 | M inim um val ue for conformity | Observed value |
Dimensional changes caused by humidity | Nodelaminationin the extreme range of humidity. Dimensional change not more than +1 mm in local planeness | No deiamination obsei'ved. Dimensional change within the specified limit |
Water resistance | There shaJInot beany delamination after 72 hours boiling | No delamination observed. |
Adlicsion of plies | Minimum pass standard | Excellent |
Mycological test | No appreciable sign of separation | Satisfactory |
Modulus of rupture | 50N/sq.mm | above50 |
Modulus of elasticit | SOOON/sq.mni | above 50()0 |
Features
Only selected species of timber are used for the manufacture of core for Aeon Block Board.
The planks are passed through a prophylactic treatment by dippijig in concentrated of insecticide and fungicide for long
lasting protection.
Tlie planks are tfien kiln-seasoned to less than 8-10% moisture content for proper bonding.
Aeon Block Board has high dimensional stability with high mechanical properties and excellent screw holding capacity.
It does not expand, contract or warp like solid wood.
Usage
► Cabinets,almirahsandotherfumiture ► Doors, partitions, shelves and other interior applications *■ Roofing, fencing
and otherexlemalapplicalions.
Precautions
► Aeon Block Board should be stored in well-ventilated and dry places to prevent fungus, insect and borer attacks.
► Aeon Blixk Board should be stored properly in stacks on flat level to prevent it from warping, bending and twisting.
> Fine-toothed handsaw should be used for crosscutting Aeon Board.
Aeon PF Plywood Features | Usage | Precautions
Test prescribed inlS:303-19S9 | Minimum value for conform! tv | Observed value |
Glue shear strength (in drv state) | Avg. 1350N Min. rnd.nOONJ | 1485 N |
Glue shear strength (in wet state) | Avg-IOOON Min Ind. SOON | 1215N 980 N |
Resisfence to micro-organisms | Avg.lOOON Min. Ind. SOON | nsoN 1020K |
Moisture content test | Not less than 5% Not less than 15% | 7.5% |
Cyclic test AtlO(K:-Hhrs-3cycles | Min. pass standard | Lxceilent |
Al65C-a6lTrs | Min. passstandard | Excellent |
Features
► Resistant to boiling water, moisture, drv heat, termite, insects and pests.
Remains unaffected inspite of changing weather condition.
Ideal for applications in both exterior and semi-exterior usage.
Usage
► Furniture parhtions ► Panelling ► Cavity flooring ► Panelled doors Hoardings ► False ceiling and other
exterior and semi-exterior applications.
Precautions
► Aeon BWR Plywood should be stored in a well ventilated and dry place to prevent fungus, insect and borer attacks.
It should be stored properly in stacks on a flat level to prevent warping, bending or twisting.
► It should be kept away from extreme heal and sun light to prevent dis colouration and other damages.
► Good quality synthetic resin adhesive should be used for proper bonding of Aeon plywood.
► Fine-tootJied cross cut saw should be used for sawing/cutting of Aeon plywood.