Aeon MR Grade Block Board Features | Precautions | Usage
Aeon MR Grade Block Board is manufactured using selected specits of limber. Melamine synthetic resin is used for
proper l>nnding. The product is diamentionaJly stable with high mechanical properties and excellent screw holding
capacity. Ideally used for interior cabinets, admirahs, furniture, door, partitions selves and other interior applications.
Features
► Only selected species of timber are used for the manufacture of core for Aeon Block Board. The planks are then kiln-seasoned to less than 8-10% moisture content for proper bonding. Aeon Block Board has high dimensional stability with high mechanical properties and excellent screw holding capacity.
► It does not expand, contractor warp like solid wood.
Usage
► Interior cabinets, furniture, doors, partitions, shelves and other interior applications.
Precautions
Aeon BIockBoard should best welt ventilated anddrres places to prevent fungus, insect and borer attacks.
Aeon Block Boards should be stored properly in stacks on flat level to prevent it from warping, bending and twisting.
Aeon MR Grade Plywood Features | Usage | Precautions
Aeon MR Grade Plywood Features | Usage | Precautions
Aeon MR Grade Plywood has superior quality wood for the inner core as well as the outer surface and is bonded hy urea
formaldehyde resin and melaniine by hot pressing, it docs not crack, warp or delatninate easily. It is normally used for
furniture making, well panelling, partitions and ceilings.
Features
► ItiS bonded with high quality syntlietic MUF resin, which makesit moisture resistant.
It is a superior quality commercial plywoodd suitable for all interior applications.
Usage
► All household interiors ► Office in baaors ► All type of furniture *■ Partitions and panelling work.
Precautions
► Aeon MR Grade Plywood should be stored in a well ventilated and dry place to prevent fungus, insect and borer attacks,
Aeon MR Grade Plywood has superior quality wood for the inner core as well as the outer surface and is bonded hy urea
formaldehyde resin and melaniine by hot pressing, it docs not crack, warp or delatninate easily. It is normally used for
furniture making, well panelling, partitions and ceilings.
| Technical Specifications |
|
|
|
|
|
|
| Test prescribed m IS: 303- | -Minimum value for | Observed value |
| conformity |
| |
| Glue shearstrength (in dry state) | Avg.HWON | 1180 N |
|
| Min. ind.SOON | 960 N |
| Glue shearstrength (in wet state) | Avg.80CIN | 920 N |
|
| Min. ind.650N | 740 N |
| Mycologica! | Avg. SOON | 890 N |
|
| Min. ind. 6500 N | 708 N |
| Moisture content | Not less than 5% |
|
|
| Not less than 13% | U)% |
| Cyclic test | Min. pass standard | Excellent |
|
|
|
|
Features
► ItiS bonded with high quality syntlietic MUF resin, which makesit moisture resistant.
It is a superior quality commercial plywoodd suitable for all interior applications.
Usage
► All household interiors ► Office in baaors ► All type of furniture *■ Partitions and panelling work.
Precautions
► Aeon MR Grade Plywood should be stored in a well ventilated and dry place to prevent fungus, insect and borer attacks,
Aeon Decorative Plywood | Features | Usage | Precautions
Aeon Decorative Plywood | Features | Usage | Precautions | Technical Specifications
Ornamenta! veneers are bonded on one or both sides to make
it look beautiful. Gurjan core is used as core with superior
glue for perfect bonding makes the product borer and termite
resistant. Available in recon and natural species collected from all over the world.
Features
► Wide range of design, colours, shades and grains.
► Superior surface finish.
► Use of gurjan core makes border and termite resistant.
Better glue shear strength ensures good bonding.
Usage
Use for interior decoration in;
► Furniture of all kinds.
Precautions
► Aeon Decorative Plywood should be stored in well and dry places to prevent fungus, insect and borer attack.
► It should be stored properly in stacks on flat level to prevent from warping, bending and twisting.
Ornamenta! veneers are bonded on one or both sides to make
it look beautiful. Gurjan core is used as core with superior
glue for perfect bonding makes the product borer and termite
resistant. Available in recon and natural species collected from all over the world.
| Technical Specifications |
|
|
|
|
|
|
| Requirements | Specified value as per 15:1328-19% | Compliance |
| Open splits | Not more than 150 n:mi length and 0.5 mm in width rectified with veneer insert bonded with synthetic resin adhesive | O.K. |
| Tom grain, dead knots, dote discolouration and sapwood | Free from such defects | O.K. |
| Moistui^e content | >5, <15 | O.K. |
| Water resistance test | No delamination or blister formation | O.K. |
|
|
|
|
|
|
|
|
Features
► Wide range of design, colours, shades and grains.
► Superior surface finish.
► Use of gurjan core makes border and termite resistant.
Better glue shear strength ensures good bonding.
Usage
Use for interior decoration in;
► Furniture of all kinds.
Precautions
► Aeon Decorative Plywood should be stored in well and dry places to prevent fungus, insect and borer attack.
► It should be stored properly in stacks on flat level to prevent from warping, bending and twisting.
Aeon Flush Doors | Technical Specifications | Usage | Feature |Precautions
Aeon Flush Doors | Technical Specifications | Usage | Feature |Precautions
Imported timbers of excellent qualiy and high resistance arc used to manufacture Aeon
Flush Door. Anti-borer and anti-termite make the product safe and durable.
The product is solid, tough to withstand dust and heat. Used for nursing homes,
auditoriums, residence, offices, hospitals, schools, colleges, etc. Available in one side, both sides teak.
Feature
► The batten are all made from selected single species of hardwood timber.
► The battens are machined and planed to the required thickness, presentative treated and season kiln dried.
► The battens are individually treated with insect toxic for long lasting protection.
► The boiling water proof synthetic phenol fomaldehyde adhesive used for adhesion is specially tinged with toxicants
and antidotes.
► Both internal and lipping can be provided at an extra cost,
► Apart from the standard sizes and thicknesses. Aeon Flush Doors are also available in other sizes and thickness.
Usage
*■ Aeon Solid Core Flush door is used for door shutters at homes and offices.
Precautions
► Aeon Flush Doors are to be handled with utmost care to avoid damage and scratches.
► Doors should be stored in a dry, dean and covered place havingraised and level surface.
► Flush Doors are to be installed only after finLsliing construction works,
► Polishing and painting of doors should be done after properly cleaning thesurface.
Imported timbers of excellent qualiy and high resistance arc used to manufacture Aeon
Flush Door. Anti-borer and anti-termite make the product safe and durable.
The product is solid, tough to withstand dust and heat. Used for nursing homes,
auditoriums, residence, offices, hospitals, schools, colleges, etc. Available in one side, both sides teak.
| Technical Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Test prescribed in JS:2202 (Part-1) 1999 | Minimiun value for conforntit\- | Obser\'ed value |
| Dimension and squareness lest as per IS : 4020 (Part-1) 1998 | Height and width measured within a limit + 5 mm | VVittiin specified limits |
| General flatness test as per IS:4020 Part4) I99a. | Twist, cupping, and warping shall not exceed 6 mm. | Withiji specified limits. |
| Edge loading test - As per IS ; 4020 (Part-T) 1998. | Tlie deflection of the edge at the maximum load shall not he more than 5 mm. | Within specified limits. |
| Shock resistance test as per IS : 4020 (part-8) 1998. | 4-5 shucks min. |
|
| Slamming test as per IS : W20 (Part-10) 1998. | 50 times on the nails at the rate of 4.5 drops/min. | Found ok |
| Varving humidit\' test as per IS:'4020 (part-12) 1998. | Denviation measured to an accuracv of 1.0 mm. | Within specified limit |
| End immersion test as per IS : 4020 (part-13) 1998 | Shall have no delamination at the end of the test- | Found ok |
| Knife test as per IS : 4020 (par(-14) 1998. | Minimum pass standard twnd at the end of the test. | Excellent Bond |
| Glue adhesion lest as per IS : 4020 (part-15) 19% | No delamination | Found ok |
| Screw withdrawal resistanct test as per IS : 4O20 (part - 16) 1998 | -Minimum required on withdrawal is 1000 N. | 2500 N No visible damage after the test |
|
|
|
|
Feature
► The batten are all made from selected single species of hardwood timber.
► The battens are machined and planed to the required thickness, presentative treated and season kiln dried.
► The battens are individually treated with insect toxic for long lasting protection.
► The boiling water proof synthetic phenol fomaldehyde adhesive used for adhesion is specially tinged with toxicants
and antidotes.
► Both internal and lipping can be provided at an extra cost,
► Apart from the standard sizes and thicknesses. Aeon Flush Doors are also available in other sizes and thickness.
Usage
*■ Aeon Solid Core Flush door is used for door shutters at homes and offices.
Precautions
► Aeon Flush Doors are to be handled with utmost care to avoid damage and scratches.
► Doors should be stored in a dry, dean and covered place havingraised and level surface.
► Flush Doors are to be installed only after finLsliing construction works,
► Polishing and painting of doors should be done after properly cleaning thesurface.
Aeon Fire Retardant Plywood Technical Specifications | Features | Usage |
| Technical Specifications |
|
|
|
|
|
|
| Test prescribed in IS:55I)y | IVlininium value for conforniitv | Obser\-ed value |
| Moisture content | S%--\5% | 12% |
| Glue shearstrength (in dr\'state) | Min-ind-nOON Avg.ind-1350N | T25nN 1330N |
| Glue shear strength (wet) | Min.ind-800N Avg.ind-inoON | >ll)SON >135DN |
| Mycological test | .Min.ind-SnOK Avg.ind-IODON | >1050N >1300N |
| Cvclictest | Min. pass standard | Excellent |
| Knife test (adhesion of ply) | Min. pass standard | Excellent |
| Flammabilitv test | Niitless than30min. | > 40 Min. |
| Flame [.Hfnetrtition test | Not less than 15 mts. for every A mm thickness | > ^5 mts. |
| Rate of burning test | Not less than 40min. | > 40 mts. |
| Retention | 50kg/m-^ | 70-80 kg/m'^ |
|
|
|
|
Features
► Fire resislant, Abrasion resistant. Scratch resistant. Stain resistant. Crack resistant.
Usage
► Recommended for horizontal and vertical use.
*■ Fire prone areas like kitchen, restaurants and hotels.
*■ Heavy duty doors and wall coverings.
► Interior wails of public transport systems
Aeon Flexi Plywood | Features | Usage | Precautions
Aeon Flexi Plywood | Features | Usage | Precautions
Aeon Flexi Ply is a unique achievement of modem technologj'. The inherent problem of plywood has been its rigidity. But the technolog' combined with conventional material has created Flexi Ply which is the ultimate solution to the need and requirement of the furniture makers and the carpenters. It can be easily bent even by hand and offers tremendous flexibilitv to be maneuvered easily according to the requirement. Once it is glued, laminated or veneered, it holds the required shape.
Features
► Aeon Flexi Ply allows cold forming to the smalles tradius requirements. No need for heat forming or water treatment.
Self-supporting structures eliminate the need for structural skeletons or special supports.
► Unique design models, round structures and complex multi radii shapes that were virtually impassible to create with traditional material, can be quickly and easily prepared.
Usage
Aeon Flexi Ply, with its extremely high bending propety is highly suitable where bowed or curves hapes are required
Precautions
Aeon Flexi Ply should be stored in a cool, dry place.
The panel should be glued while fixed in desired shape. After the glue dries, the panel will maintain its shape.
The panel should be transported on a hard flat surface.
manner for long periods.
Aeon Flexi Ply is a unique achievement of modem technologj'. The inherent problem of plywood has been its rigidity. But the technolog' combined with conventional material has created Flexi Ply which is the ultimate solution to the need and requirement of the furniture makers and the carpenters. It can be easily bent even by hand and offers tremendous flexibilitv to be maneuvered easily according to the requirement. Once it is glued, laminated or veneered, it holds the required shape.
| Technical Specifications |
|
|
|
|
| Thickness | 4 mm, 6 mm, 8 mm, 12mm |
| Composition | Diptercarpus species. Hot pressed with tliermo-settingBWK Grade Adhesive |
| Density | 0.75 gm/cc |
| Bending radius 4 mm 6 mm 8mm 12 mm | Up to 7cm radius Up to ] 0 cm radius Uptol2cm radius Curve |
| Direction of flexibilitv | Cross grain a 1 on g width |
Features
► Aeon Flexi Ply allows cold forming to the smalles tradius requirements. No need for heat forming or water treatment.
Self-supporting structures eliminate the need for structural skeletons or special supports.
► Unique design models, round structures and complex multi radii shapes that were virtually impassible to create with traditional material, can be quickly and easily prepared.
Usage
Aeon Flexi Ply, with its extremely high bending propety is highly suitable where bowed or curves hapes are required
Precautions
Aeon Flexi Ply should be stored in a cool, dry place.
The panel should be glued while fixed in desired shape. After the glue dries, the panel will maintain its shape.
The panel should be transported on a hard flat surface.
manner for long periods.
Shuttering Plywood Aeon | Feature | Usage | Precautions
Aeon Shuttering Plywood is an exterior grade,
pruscrvative treated plywood manufactured from
naturally durable veneers, impregnated with
unextended phenol formaldehyde resin adhe??ive.
The high strength, stability and resilience of this
product makes it ideal for all types of shuttering work
of in-house construction, factory building, bridge
construction, sewer construction, construction of
swimming pools and many other applications.
| Technical Specifications |
|
|
|
|
|
|
| Test prescribed in IS: 4990 | Specified requirement conforniity | Results |
| Moisture content test | Not less than5% Knt less than 15% | 7.7% |
| Glue shear strength | Mm.ind.nonN Avg.l350N | 1350N 152()N |
| Water resistance test (after 72 hours boiling) - Glue shear strength -Adhesion of plies | MinSOON Avg. H)(«)N Minimum pass standard | 10601SI 1280N Excellent |
| Mycological -Glue shear strength | Min. IndSOON Avg.lOOON | 1020N 121. ON |
| Tensile Test -Along the grain -Across the grain Su m of tensile strength | 32.5N/sq-mm 22.5N/sq-rmii 60.0N/sq-mm | 46.5N/sq.mm 32.2N/sq.mm 84.7N/sq.mm |
| 9100N/5q.mm 4320N/sq.inm | 9100N/5q.mm 4320N/sq.inm | 9100N/5q.mm 4320N/sq.inm |
Feature
► The main advantage of Aeon Film Coated Shuttering Plywood is that the surface layer is smooth.
► Hard and mirror like flriish on both surfaces isan extra fbiish. This finish on R.CC.constructionleadsto49% cost savings.
► II can vvilhstanti water and abrasive action of concrete, piirticularly where vibrators are used.
► Does not read adversely with cement as it overlaid with phenolic resin impregnated film which gives it a clear and smooth surface,
scratch resistance dc excellent mechanical property.
Construction of swimming pools ► Bridge construction. It is also used for
Usage
► Factories and Buildings Sewer construction
other exterior and general shuttering work.
Precautions
Proper care should be taken during erection and dismantling of the Aeon Film Coated Shuttering Plywood, SO fiat it can be used a
number o£ times.
► Occasional application of releasing agents or mould oils is required to prevent the cement from sticking to the Shuttering Plywood
surface.
Subscribe to:
Posts (Atom)