veneers. The core is made from 1(H)% pine wooden strips seasoned to a
moisture content within 12% and chemically treated for termite
resistance. The strips (each 25 mm wide) are placed vertically and glued
laterally to form the core which is placed on top of the cross band. Face
veneer is placed on top of the cross band. Phenol formaldehyde
synthetic resinis used for bonding under high pressure in hot press.
Versatile, it can be reshaped, even curved to meet the requirements and
has a variety of usage, including furniture. It is recommended for
cupboard shutters, shelves, table tops etc.
Technical Specifications
Test prescribed in 15:1659-199(1 | M inim um val ue for conformity | Observed value |
Dimensional changes caused by humidity | Nodelaminationin the extreme range of humidity. Dimensional change not more than +1 mm in local planeness | No deiamination obsei'ved. Dimensional change within the specified limit |
Water resistance | There shaJInot beany delamination after 72 hours boiling | No delamination observed. |
Adlicsion of plies | Minimum pass standard | Excellent |
Mycological test | No appreciable sign of separation | Satisfactory |
Modulus of rupture | 50N/sq.mm | above50 |
Modulus of elasticit | SOOON/sq.mni | above 50()0 |
Features
Only selected species of timber are used for the manufacture of core for Aeon Block Board.
The planks are passed through a prophylactic treatment by dippijig in concentrated of insecticide and fungicide for long
lasting protection.
Tlie planks are tfien kiln-seasoned to less than 8-10% moisture content for proper bonding.
Aeon Block Board has high dimensional stability with high mechanical properties and excellent screw holding capacity.
It does not expand, contract or warp like solid wood.
Usage
► Cabinets,almirahsandotherfumiture ► Doors, partitions, shelves and other interior applications *■ Roofing, fencing
and otherexlemalapplicalions.
Precautions
► Aeon Block Board should be stored in well-ventilated and dry places to prevent fungus, insect and borer attacks.
► Aeon Blixk Board should be stored properly in stacks on flat level to prevent it from warping, bending and twisting.
> Fine-toothed handsaw should be used for crosscutting Aeon Board.
No comments:
Post a Comment